全自动打胶机和丁基胶涂布机是具有一定的保质期的，一般来讲其保质期有10年的时间。虽然说其保质期只有仅仅的10年时间，但是由于其使用的环境的不同，在使用的过程当中也是会有可能出现一些问题，下面就来看看在使用全自动打胶机和丁基胶涂布机的时候都会出现哪些问题吧。
Automatic rubber machine and butyl coating machine has a certain shelf life, generally speaking, its shelf life is 10 years. Although its shelf life is only 10 years, but due to the different environment of its use, there may be some problems in the process of use. Let's take a look at the problems that will appear in the use of automatic rubber beater and butyl rubber coater.
一、随着全自动打胶机和丁基胶涂布机所使用的时间在不断的增加，这一个设备所具有密封性能是不断的降低的，这样会导致这一个设备的内部气体与外界大气相通，从而会使得其所具有的保温性能极大的下降。这是一个出现频率非常高的问题所在。
1、 With the continuous increase of the time used by the automatic rubber beater and butyl rubber coater, the sealing performance of this equipment is constantly reduced, which will lead to the internal gas of this equipment communicating with the external atmosphere, thus greatly reducing its thermal insulation performance. This is a very high frequency problem.

二、随着设备自身所具有的密封性能的下降，其所具有的抗压能力也是会呈现出一个下降的趋势的。在这样的一个情况之下，一旦外界给予其的压力过大的话，那么是会很容易造成其表面的涂层脱落的，甚至有时候还会出现爆炸的现象，造成严重的人员伤亡产生。因此在对其进行安装之前一定要对所具有的抗压性能以及抗压强度有一个充分了解。并在使用的时候采取一些适当的防护措施，这对于延长使用寿命来讲具有极大的好处。
2、 With the decline of the sealing performance of the equipment itself, its compressive capacity will also show a downward trend. In such a case, once the external pressure is too large, it is easy to cause the coating on the surface to fall off, and even sometimes there will be explosion, causing serious casualties. Therefore, before the installation, we must have a full understanding of the compressive performance and compressive strength. And take some appropriate protective measures when using, which has great benefits for extending the service life.
三、隔热层所具有的隔热性能也将会出现降低的现象，这也是所具有的一个常见的问题所在。
3、 The thermal insulation performance of the insulation layer will also be reduced, which is a common problem.
在使用全自动打胶机和丁基胶涂布机的时候可能会出现的问题就包括上面的这些方面了，可以说这也是这一个行业目前亟待解决的问题所在，只有这样才能更好的进行生产。
In the use of automatic rubber machine and butyl rubber coater, the problems may include the above aspects, it can be said that this is the industry's current problems to be solved, the only way to better production.