丁基胶涂布机的使用与维修
Use and Maintenance of Butyl Rubber Coater
丁基胶涂布机是做槽铝式中空必须用的设备，目前咱们国内设备厂家一般用的系统一种是液压，一种是气液增压，
Butyl rubber coating machine is a necessary equipment for making aluminum hollow groove. At present, our domestic equipment manufacturers generally use hydraulic pressure and gas-liquid pressurization systems,

现在国内大多数厂家是气液增压。
At present, most domestic manufacturers are gas-liquid superchargers.
丁基胶涂布机常见的问题是：
Common problems of butyl rubber coater are:
1：不出胶，原因是丁基胶里面有杂质，把出胶口堵住了，清洗胶头即可。
1: No glue is released, because there are impurities in butyl glue, which block the glue outlet, and clean the glue head.
2：不粘胶，原因是丁基胶有杂质，或者是加热棒有坏的，还有就是压力不够。
2: It is not sticky, because the butyl rubber has impurities, or the heating rod is broken, and the pressure is not enough.
3：出胶没有压力，原因是电磁换向阀有卡阀现象，或者五通阀有卡阀。
3: There is no pressure for glue discharge, because the solenoid directional valve is jammed, or the five way valve is jammed.
以上就是为大家介绍的有关丁基胶涂布机详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎半岛（中国）.我们将以的态度,为您提供服务http://www.kksmartoffice.com
The above is a detailed introduction of butyl rubber coater for you, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://www.kksmartoffice.com